产品中心
新闻动态 当前位置:首页>新闻动态>新闻动态

钢坝、由门叶、埋件、底轴、拐臂、槅门器、液压启闭机等部分组成。

网址:www.gangba.net.cn  2021-06-22  作者:admin    阅读:

钢坝、由门叶、埋件、底轴、拐臂、槅门器、液压启闭机等部分组成。
The steel dam is composed of gate leaf, embedded parts, bottom shaft, crank arm, door partition device, hydraulic hoist, etc.
钢坝闸门运行方式为动水启闭,可局部开启。闸门两边各式各式各设一套液压启闭机带动底轴拐臂运动是闸门升卧运动,开关闸门。
The operation mode of steel dam gate is dynamic water opening and closing, which can be partially opened. A set of hydraulic headstock gear is set on both sides of the gate to drive the crank arm of the bottom shaft to move, which is the lifting and horizontal movement of the gate and the opening and closing of the gate.
主要部件:
Main components:
闸门支铰采用圆柱铰,材料采用ZG310-750,轴套采用ZQA9,支铰轴承采用关节轴承,支铰是门叶启闭时候的转动中心,支铰固定件由地脚螺栓固定在底板上,活动件由螺栓与门叶结构相连,承受总水压力,门叶重量及开启过程中启闭力等外力,是翻板闸门启闭的关键部件。
The gate hinge is cylindrical hinge, and the material is zg310-750, The shaft sleeve adopts zqa9, and the hinge bearing adopts the joint bearing. The hinge is the rotation center of the gate leaf when opening and closing. The supporting hinge fixing part is fixed on the bottom plate by the anchor bolt, and the movable part is connected with the gate leaf structure by the bolt. It bears the external forces such as the total water pressure, the weight of the gate leaf and the opening and closing force during the opening and closing process. It is the key component of the flap gate.
支铰的 最大负荷钢制闸门 钢坝 保定轻钢别墅 保定平面设计培训 保定室内设计培训 保定办公家具 保定空调维修 ,应发生在闸门刚开启的时候,此闸门承受水压力,启门力及闸门自重等外力全部由支铰承担。每孔闸门有多个支铰,根据孔口宽度计算分布在不同位置。
The maximum load of the hinge should occur when the gate is just opened. The external forces such as the water pressure of the gate, the lifting force and the dead weight of the gate are all borne by the hinge. Each gate has multiple hinges, which are distributed in different positions according to the width of the orifice.

返回新闻

网站出租电话
13313028229